Search results

we have a 1996 330 Sundancer. During a recent heavy rain I noticed water leaking thru and around the window glass and the rubber channel. Is there an ‘easy’ way to seal the glass in the channel? Or, does the channel all need to be replaced? Has anyone done the replacement? If so difficult and...

I have a 1996 330 Sundancer that I am trying to install a gas fumes sniffer. Is there any tricks or hidden passages that can be used. It looks like all the wires and cables from the dash area lay on top of the starboard fuel tank. Any guidance would be appreciated.

We are new to the Sundancer with a 1996 330. Seems like a great boat. With all the rain in the Great Lakes area the inside of the trunk is always wet. Is this normal? Would like this area to be dry. Water also seems to seep from the trunk to the back of the compartment where the hose connection...

Has anyone replaced the rollers on the cabin entry doors? If so where did you get the replacement rollers and how did you get the sliding door out? I have adjusted the rollers many rime but I am close to not have anymore adjustments. Tx

I have a 1987 340 EC and the port Rudder Post is leaking. I am guessing that the rudder needs to be re-packed or tightened. Has anyone done this on this vintage? What is the prodedure for repacking the rudder post? Any gottcha's? Thanks Bill

Does anyone have a source for old Sea Ray parts?? I have a 1987 340 Express and I am in need of a replacement dash switch panel. The panel is a blue graph design with all the cutouts for the switches and lableled. Of course the panel is pressed something (cardboard) and is cracked. Is there a...

I have a 1987 340 Ex with twin Crusader 454's and it seems like both are producing a lot of exhaust steam. I have changed both impellars and there seems to be good water flow from both exhaust. This is in fresh water and the boat has never been in salt water. Approx 625 hours on the engines. Is...

The 80's Sea Rays have 4 portlights on the bow that are thin plastic non-opening windows. All 4 of mine have cracks. I have the parts to replace them. Has anyone done this? any tips or do's and don'ts? Thanks