Search results

Hi, Looking to order some green bonding wire and hardware to reconnect the strainers etc. What size wire did they use on an 06 40 MY? TY

Purchasing a Simrad radar/gps/sounder for my 95 370 dancer and was wondering what transducer would fit this application. There are 2 choices, a zero to 12 deg or a 12 to 24 deg. I know the deadrise is 20 deg but not sure if it flattens out away from the centerline. Any input would be appreciated. Ty

3 weeks ago my starboard heat exchanger decided to fail. I've been wanting to replace the 2 H/E's out for about 3 years. My mechanic maintains that he can no longer get the single tank design and will have to retrofit with the dual tank style.. I can't fathom why he can't get the single tank..I...

Can anyone recommend a good Westerbeke tech in the Monmouth cty area?

I was wondering if anyone has a good source for heat exchangers?. Mine is the single tank heat exchanger only design..1995 7.4 carb motors, Bluewater. Any help would be appreciated. I understand these are difficult to find. Thanks

While helping a friend change his oil on a 02 340Da w 6.2's, I noticed that the little ball was broken off the top of the dipstick and the stick itself was about an 1" 1/2 from the top of the tube and we were unable to remove it, I was afraid of forcing it further down into the pan.. I then...

Someone I know has a lead on an express bridge that may be a good deal.Is there anything about this model that should be noted(good/bad)? Of course full survey etc..But are there any major problems with this model that are common? Any input would be appreciated. Thanks

Anyone have any ideas where I can find a wood replacement table to replace the original blue mica one..It's a 95 370 DA.. Thanks

Hi all, I'm in the process of rebuilding the rear seat bolster on my 95 370DA.I have all the wood cut(1/2" marine ply)with the exception of the small piece for the radius which I used 3'8 wiggle board.My question is what can I use to properly seal the wood? My thought was a polyester(boaters...

I have a 630 vdrive in a 95 370 Sea Ray SD. I started the season with a fluid change,boat sat unused for about 3 weeks with not a drip.Took the boat on the first trip and noticed a small amount of fluid under the case,about 3-4 drops right in the area of the case where it splits,so I wiped it...

Just realized I never introduced myself..Rich from New Jersey/Navesink area....95 370 Dancer...Amy Lee II..Great board/great advise...Cruising Hudson/LI Sound/Raritan Bay NJ.This board and the previous has kept me well informed on the in's and outs of this particular model..This is my 3rd...