2012 450 Sundancer, need to replace one of the S/T round end knobs where the chrome plating has worn off and will scratch your hand.
I've looked on line but can't seem to find a source. If I can't I'll have to get both of the replated at a metals shop somewhere.
Thanks
I have a 2012 Sea Ray 450 Express. The ACR spotlight on the bow, Model RCL-100D, intermittently works. The keypad at the helm beeps when I push the rotation wheel or the on/off button but the light doesn't come on or move. I know there is a controller between the keypad and light but don't know...
This may be a silly question but I have 4 batteries on the boat. My manual only tells me what the replacement model/size I should replace with. It doesn't tell me what each battery is for. I have 2 gauges on the dash indicating the charge level of 2 of the batteries, assume these are for the 2...
I need to replace the blades, 31”, not sure if these are the original ones but looks like they are connected by a bolt and screw. Anyone know of a source?
2012 450 Sundancer, the electrical outlets on the port side only in the galley, media room and forward stateroom all don’t work. I can’t find a GFI trip button anywhere but think there must be one somewhere. No breakers are tripped. Any ideas?
I have a 2012 450 Sundancer with twin Cummins 380 diesels. My mercruiser vessel view display module at the helm indicates 282 hours on the generator while the display on the actual generator shows 326 hours? I thought these should read the same. Is this common? Is it due to running the generator...
So I bought this used Sundancer and have yet to find any Owner's info on what causes the flush control light in the head to go from green to red. Tank has been emptied and not aware of any fresh water issues. Any ideas????
Does anyone know where I can purchase a replacement steering wheel emblem cap for a 2012 450 Sundancer. The one I have is damaged. See picture attached.
I have a 2012 Ray Marine radar and single MFD screen at my helm. Is it possible to buy a used E120W and install it and will the backbone of the system support a second MFD?
Bought a used 2012 Sea Ray 450 Sundancer and wondered if there is any way to update an old CF card that has my charts on it from 2010 when the card was originally loaded?