Search results

Looking at a non Sea Ray and also a Sea Ray. Both with gas engines. Both boats are out of the water but want to have a compression check done along with oil samples on the engines and generator. On is repo which is my biggest concern so looking for a good person/company to do this. Any help is...

Contacted Al a few month's ago about getting a new compressor for my forward stateroom AC. Got right back with me and got her ordered. Had great pricing and great to deal with. The factory delayed the unit a few times which was not a big deal for me. Al even offered another 5% discount for this...

Wanted to throw it out in the threads again. Just had fresh bottom paint and wax 2 weeks ago and she's ready to roll. I do have it listed here on the Club Sea Ray used boat section. http://www.clubsearay.com/boats/listing/276/41_Sea_Ray_410_EC_2001.html Really appreciate anyone on board here...

Didn't know if anyone has found a louder replacement horn than the Marinco that is under deck. They make the exact replacement but looking for something louder without having to mount somthing above deck. Let me know your thoughts....

My alternator is not charging. Wondering if it has an external voltage regulator. It does have 2 wires coming off the back and leads to the rear of the engine into a Diode Block. Checked the Diode and swapped between engines and no difference. My guess is that it's internal but want to make sure...

Looks like the only thing I didn't run anti-freeze through came apart. Looking for the whole thing (hose/nozzle) or just the nozzle for my 2001 410 EC. Any help finding the replacement is greatly appreciated!

I'm heading out this weekend to look at a Fresh Water 2004 340 Sundancer that my friends are looking to purchase. They pretty much have a deal on it contingent on survey, sea trial and of course us not finding anything wrong. I'm wondering if there are any issues with that model and year to look...

Was having issues with the Tach's bouncing and the Sync Gauge reading erratic. Pulled the dash and cleaned the connections on all. Tach's work perfectly. Sync Gauge reads correctly when it wants to. It's either reading all the way Port when they are in sync or it reads dead nuts center when they...

Went for a ride yesterday trying to burn last years fuel and when I got back to the dock, the "Empty" light was on. Looked at the tank and it was empty. What would allow the tank to be sucked dry while running. Could the Duck Bills have something stuck in them that would allow this??? Don't want...

Decided to replace the Pump and Float Switch in the Shower/AC Sump. Was able to get the exact Rule Pump and a newer version Float Switch. After a few self inflicted issues ie. clipping all 4 wires by accident instead of 1 at a time resulting in blowing the breaker which I have now found in the...

My cabin AC will run and after a period of time, it will shut down for 10-15 seconds and then fire right back up again on it's own just like it has reached the desired temp. Nothing appears to be wrong, no codes etc. Ths unit is a 16000 btu with the SMX11 Controls. Any suggestions??

Looking for opinions. I have my boat up for sale thinking about getting something smaller until the economy gets better but have since figured what's the sense of having that money in the bank when I could have another boat. Love my Express but my Bride To Be wants to be able to see out of the...

Decided to pull the Airsep's and clean them. Pulled the springs and cap off but couldn't get the filters to come out. This is my first time with this and don't want to break anything. Any help/suggestions is greatly appreciated.

Started seeing a faint black streak coming out of the outside vent from the Head/Kitchen Vent. Any idea where the Vent Motor is located? Guessing it's time to be replaced.

I have listed my 2001 410 Express in the classified section. You won't find a nicer boat I promise you that. Any questions/interest please let me know.

Took the maiden voyage and only a few issues. My tach's are very irractic and I can thump on them and they go back to normal for a few minutes. Would pulling the dash and cleaning the connections help/correct this? Also my Sync gauge is now off. Reads heavy to the port side when the engines are...

Wondering what I can use to remove light scratches from the outside cabin door. It seems that the Pads/Gaskets that seal around the door are causing some of this when opened/shut. Any ideas?

It's getting to be that time to put her away and since it's my first year...... I'm going to suck up some antifreeze at the strainers and wondering if anybody has a clue of how much antifreeze it's going to take to accomplish this. Any help/suggestions are greatly appreciated!

This is my first Vacuflush. I notice the vacuum pump running for 20 seconds up to 5 minutes. I've shut it off and then back on again and it seems to help but other times I have flushed again and then it runs for 20-30 seconds. Any suggestions would be greatly appreciated.

Hello, I have just purchased my first Sea Ray. 2001 410 EC with 450 Cummins. We boat on the Mississippi River. Hi to all and really appreciate having the message boards!