Search results

Hello, My original Raytheon RAR220 VHF/Hailer will not transmit. I would like to replace with new radio. Is thers a new radio that will fit my current rough opening in the dash from my old radio. Thank you.

Thank you very much. Sorry for the late response. I am dealing with Prop Shop out of Washington. The boat is out of the water and I hope to remove the shaft this coming weekend. FYI the Prop shop wants to go with a split coupling for the new shaft instead of the tapered end for the coupling...

Looking on some advice on replacing the prop shaft. The shaft is 1-3/4" and will also need new cuttless bearings. Thanks in Advance.

May I ask where you are getting your new canvas made? Thank you.

I have a whining noise coming from the port side when shifted in to neutral. Noticed last year after driving through some muddy water on the Colorado. I do not notice any noise or vibration while under load. I am thinking the cutlass bearing. Any Idea what could be going on here?

The turbo failed 1100hrs on port motor. The spot weld holding the fan blade to the through broke, fan was spinning not the shaft or compressor. Boat runs stronger than ever. Port engine is still running about 10 degrees warmer than the port engine. I have read about others with problematic...

Does any one know if my 1998 Raytheon transducers will plug into the Raymarine I50 tridata display? Thanks.

Thank you for the kind knowledge. This is exactly what I need to do. Checking or replacing the transducers looks a little scary. Do you know if I can just buy the I50 display PN E70060 only for now and plug back into my existing transducers? If I need replace my transducers with the new ray...

1998 SR 450 sundancder with Raetheon Raydata with triple read out; Depth, Speed, and water temp. The unit turns on but has three bars for each of the three categories. Do I need new transponders? Are the transponders covered in zebra muscles? Can I replace the through hull transponders while...

Just an update. After visiting the boat this weekend I checked the blow by hose and filter and found them to be free of fuel/oil. The engine sounds good and strong. After running around the lake in the engine room I noticed that the intake manifold on the good starboard engine is 30 degrees...

Thank you.

Thanks for the reply. The filter is a K&N I do not think could be clogged. I will check the hoses, but it just lost power so fast I think it is a turbo. After speaking with Cat dealer they informed me that the old turbo has been discontinued and the new turbo will require a new exhaust...

I think this is the same hose and no I have not checked that filter. Are you saying that you needed to rebuilt your turbo or engine? This hose blew oil into the exhaust and smoke came out the back correct, or did the oil drip down the engine and onto the exhaust manifold and create smoke in...

Hello, I took the boat out last weekend after changing the fluids the previous weekend. We ran about 40 miles down lake when all of the sudden the port engine lost power and started blowing black soot smoke. The engine was about 180F when the power loss happened. The engine in a 1998 Cat 3126...

Hoping someone could help me. Just took the boat out this weekend after changing fluids last weekend and ran about 40 miles when suddenly loosing power and blowing black smoke out the port motor. Engine was running about 180F during the time of the mishap. Boat motor is a cat 3126. The engine...

Thank you very much. It must be next to the hot water heater. I will take a look when I get to the boat this weekend.

I have no idea how to fix your windshield wiper motor. Would you be able to tell me where the Aft vacu flush vacuum generator is located?