Search results

  1. G

    Select EX Thread

    Been awhile since I've been on here. Just read thru last 2 years of posts! I have a 2005 27' SLX with the 6.2 and bravo one. I only hit about 35 mph max. My frig crapped out last year. My gear lube is leaking somewhere. Pulled boat and gear lube is good in out drive. Can't find leak...
  2. G

    6.2 mpi sputters between 1000-2500 rpm

    It is 320 hp with a bravo II drive. It moves the boat pretty well. Cruises at about 25-28 kts I think. Not fast but fine by me. If I had it to do over again probably would've got the bigger motor but at the time I didn't know any better and was like $10,000 more (if memory serves me)...
  3. G

    6.2 mpi sputters between 1000-2500 rpm

    Thanx for the help. Checked everything again. All looks good. Going to try compression test and check all the plugs. Also thinking it may be the injectors? Not sure though Thanks again for the input
  4. G

    6.2 mpi sputters between 1000-2500 rpm

    Just got my 2005 27'SLX in the water. She starts up fine, idles nicely, and at WOT runs smooth. But on take off, she sputters a few times until the RPM's get over 3000. Replaced the plugs/wires/cap&rotor Replaced fuel filter Replaced pcv valve Idle does seem a little low...idling...
  5. G

    vacuum line on engine????

    thanks for the reply....I will look at that today. Hope I find it, can't imagine there is not a hose to it. Will see
  6. G

    vacuum line on engine????

    see what you mean, but it must just be the flash. It is intact. Looked all around the engine for a line that maybe fell off, cannot find anything.....baffling me thx
  7. G

    vacuum line on engine????

    Just put my boat in the water last week, had trouble starting it....opened up hatch and looked around....pulled plugs and noticed not getting fuel. Looked at the fuel filter and lines. Noticed a vacuum hose right by the injectors. There is a T fitting on it and nothing connected to it. I covered...
  8. G

    removing batteries and closing engine hatch?

    thanks for all the advise guys! I think I'll make my own jumper and use the battery I pulled out, it's still on the boat. Good idea with the pigtail thru a 12V socket. A shame Searay didn't make a simple plug in for this purpose. What if your batteries are dead and your hatch is closed...
  9. G

    removing batteries and closing engine hatch?

    My boat is stored outside in NY for the winter...temps down in the 20's and maybe teens if we get a cold spell. Didn't think they would like that weather too much. Heard I should take them inside and store. Just tried using shore power...that didn't work. On the 32' Dancer, hooked up my...
  10. G

    removing batteries and closing engine hatch?

    Have a 32' Dancer and a 27' SLX on blocks......done winterizing, need to remove batteries but wondering how do I close the engine hatch without batteries? Sounds kinda silly but I cannot figure out for the life of me!!! ANy help is much appreciated. I am guessing maybe on the 32' I can use a...
  11. G

    Select EX Thread

    Re: 270 Select EX Thread rod holders are nice! I'm new to this, in the process of buying my friends '05 SLX. I love it. I am using it this summer with my wife and 2 little ones and we love it so far. Out of Long Island, NY. Couple of little things with it, seems to have a couple of pinch...
  12. G

    installing seawater pump impeller

    I am installing a new impeller on a bravo engine seawater pump. My question is which way the impeller "paddles" should face. There is an arrowe on the housing showing the rotation direction and I thought I'd follow that. The old one I removed is the opposite way though! I'm new to this and I...
  13. G

    89 268 Electrical Q's

    I will check that out tom. Thanx for the help!
  14. G

    Misc new boat(to me) questions

    I just bought my first boat...a 1986 268 Sundancer. I'm learning all the features on the boat but have a few questions if anyone can offer some help and advise. 1. The toilet - has a porta-potti with tank on bottom. Behind it there is a hose (I believe to the macerator). There is no where...
  15. G

    89 268 Electrical Q's

    I recently bought a 1986 268 Dancer and I'm still figuring out a few things on it. Couple of questions. I have a dual voltage frig but it does not work on 12V. Only on shore power. Is there a switch I'm missing? I would think it should switch automatically....not sure. Also, I have a stove...
  16. G

    LH vs. RH PROPS

    Thanks from the info.....by the way Hampton, I actually started to believe it for a sec....thinking "how could how I pick it up matter?".....HAHA I'm an idiot. I'm thinking mine is RH, will check today. Thanks for the help!!
  17. G

    LH vs. RH PROPS

    looking at buying a new prop. Can anyone tell me how to tell whether I need a left hand or right hand prop? I have a 86 268 with a 350 and alpha drive. Currently has a 15x15 alum. New to boating and not sure which I need Thanks
  18. G

    Front Hatch missing parts '86 268

    I just bought a 1986 268 Sundance and I'm cleaning it up. The front hatch does not have a hinge on it at all. It has the two locking devices and the 2 rods to hold it up but the other side is just the glass. I have no idea what is supposed to be there. Can anyone tell me what kind of hinge...
Back
Top