Got an interesting question for y'all. A friend just had his Sea Ray hauled and the bottom painted. Paint was Pettit Trinidad anti-fouling, black. The boat was surveyed after several days on the hard. The surveyor got high moisture readings over virtually all of the hull below the water line as...
I'm looking for some pointers on entering the channel at North Bimini and on to the Big Game Club. I have recent charts but I've been told to seek recent knowledge as things can change there and sometimes aids to navigation don't keep up. Thanks.
Howdy, Making our first trip to Bimini on May 21 - 23 depending on conditions. Anybody been there recently and want to pass on some sage piloting advice? We'll be coming from Black Point marina near Homestead and staying at the Big Game Club. Thanks, Brett.
Hey all. Got another question. Manual sez I should clean the strainer. To pull it out it looks like I need to screw a bolt into the cover and attempt to remove it by pulling on the bolt. Does this sound right? Before I go buy a bunch of various size bolts at Ace, does anyone know what the size...
Hi guys,
One of my transmissions needs a bit more fluid; it's at the low fluid mark. The data plates indicate that engine oil cc or cd should be used. Both of these are now obsolete. My transmissions are Twin disc model MG5114 A. What do you guys use?
Thanks,
Brett
Hello again,
My windlass gypsy has the following markings: 5/16, 8, and H.T. I'm assuming that this means my windlass is set up for 5/16" high tensile chain. Is the 8 a metric equvalent? The chain I've been running looks to be 3/8 inch but it seems to be working with the windlass just fine...
Howdy,
Currently have 130 ft of chain rode only. Thinking about adding another 100 ft (or more) of three strand nylon. What would be an adequate diameter of nylon line for my beast? Going to Bimini soon!
Thanks,
Brett.
Howdy all,
Need to clean and repaint some rusty areas on my engines. I have white Caterpillar engines (except for the rusty areas of course). Any recommendations as to the type of paint and color? I was going to use a spray automotive primer after wire brushing the bad areas. And then paint...
You guys are great. Contacted Sea Ray and they gave me some clues as to the location of the air pump. It happened to be behind an access panel inside one of the cabinets in the starboard head. Gave it some oil (as per this thread) and it works again. Yay. Had to buy new horns from Sea Ray cause...
Howdy,
I want to clean my air filters. The Cat manual lists a cleaner and an oil by part numbers but no other info. Anybody know what these materials are and if there are offsets available?
Thanks.
PS. My local Cat rep had no idea what I was talking about!!!
Howdy,
Trying to figure out why my horn gives out such a weak blast. Can barely hear it. First question: Where is the air compressor that operates the horn? The manuals give no clue.
Thanks.
Thanks for the info. Nice boat. It looks a lot like mine and you've got the same engines! My Caterpillar manual sez to put 2 different compounds on the threads, one on the brass cap outer threads, the other on the zinc threads. My local Caterpillar parts guy had no idea what I was talking about...