Last chance for a CSR member to get a great deal
Boat will be sold and sent to Florida
Look in Classified sections for details
380searayforsale@gmail.com
Thanks for the reply
The mayfair is the brand that is on the boat and very noisy and I read a while back about a higher end blower that is much quieter.
I want to change out the very noisy motor that is located behind the microwave.
The current motor is made by Mayfair.
I saw a post a while ago but I cant find it now
Thanks
2003 380 sundancer
2003 380 Sundancer 8.1 Gasser ZF Trannies.
This weekend noticed the starboard tranny did not "clunk" (positively engage) into gear when changing to reverse and when back at dock, I observed that the tranny would engage slowly after a couple of seconds and work fine thereafter, no slipping...
7th Season coming up. Heat from the exhaust discolors lighter. Scratches show a lighter color.
Love it.. wouldn't want a white hull.
Doesn't show black streaks just hose down and looks good as gold
Engines turn up to 4600 rpm. It only happens under load at idle. gotta be between engine and tranny.
Gotta find a merc mechanic who cares about his work to solve the problem. So much for work ethic and mercruiser customer service.
Boats going in soon and the saga continues.
Thanks
Thanks for the input !!
ZF transmission. Merc mechanic said I have the updated dampener plate.
My mechanics thinks maybe injector.
I am into this guess work for about 3K and no resolution.
Looked on web - couldn't find any info.
I wouldn't want to buy a boat that did this and...
I have a 2003 380 Dancer with 8.1 gas engines.
On the prot engine, when at idle and the trannny is in gear, I get a clunk clunk clunk. and the engine starts jumping around. Does not do it at idle in neutral or when in gear above 900 RPM.
Mechainic thinks it is a misfire. I don't think...
I have a 380 dancer. The best thing is ever did on the the boat was to have a canvas made to put up instead of the 3 eisenglass panels on the windsheild area which were designed by sadists. I still have the eisenglass panels in case of rain when I have to run the boat(used them once in 3...
You don't have analog guages. They are electronically connected to the smartcraft.
I get different readings when on plane and therfore do not rely on them at all.
Do you get the same false readings when the boat is not moving?
In my smartcraft there is a page that shows fuel burn and...
I need to find a repalacement Raymarine RN300 GPS. Raymarine doesn't have replacement parts. Anybody know of a source or have an old one collecting dust. A new similar size gps/chartplotter has completely diffferent seatalk and NMEA plugs. I don't need it but I don't want a dead one on my...
I haven't had any problems up to this point with the 300 gps.
Raymarine says the battery in the 300 unit itself (not any in the antenea) craps out at about 5 years. Open the unit, take out the spot solder, replace the battery, re spot the new one --done deal.
If not, check connections for...