Search results

The water tank is aft in the engine compartment. the boat on the trailer is in a slight down angle.

Hi, where can I find plumbing schematics for the bilges and the water systems. I'm having water seeping into the bilge under the steps, where the shower bilge pump box is (2004 Sundancer 260). I thought it was coming from the shower pumps not working well, but after cleaning the box, and the...

Hello all! Does anyone have an idea how long a 6 gallon hot water heater should last on a 2004 should last in a 260 used in salt water? I just lost mine after almost 10 seasons and wanted to know if it could have been more of A winterization issue or just salt water taking it's toll..

You can buy the refills at Walmart or AutoZone. I use Rained refills and they're perfect.

Hi donewithwork, I have a 2004 260 with a little less HP, and the numbers you mention seem about right. I can hit about 34 MPH trimmed out perfectly, but honestly, I never put it up there. I know I am a cheap New Englander, but I don't think the 260 is made for blasting around at high speeds...

Could anyone suggest a good cleaner for stained fiberglass? I have some staining on the flat non slip surfaces (walking surfaces) where I can't get the blue or grey stains off of the rough surfaces of the swim platform and bow area. I have tried using bird and spider dropping products and...

Hi! Does anyone know where the fuse for the Smartcraft transducer fuse is on a 2004 Sundancer 260? My system doesn't "see" the fuse and the smartcraft and Aimar people both said said that the fuse is most likely the issue. I looked all over and can"t see it behind the gauges or down in the...

You can find the butane canister at local Ace or even Walmart stores. They don't need to be "Kenyon" brand, just Butane canisters that have the notch in the collar. I had mine rebuilt at Kenyon this year and am loving having it back onboard. The stove works great!!!

Hi! Does anyone know where the fuse for the Smartcraft transducer fuse is on a 2004 Sundancer? My system doesn't "see" the fuse and the smartcraft and Aimar people both said said that the fuse is most likely the issue. I looked all over and can"t see it behind the gauges or down in the engine...

I bought canisters of Butane at Defender's store but had a leak with the first one I put in. Started a small fire that I put out quickly. These are the first non-kenyon branded cans I have purchased. I can hear butane leaking as soon as I engage the can. Has anyone else had this issue?

Dog's life!!

Launched on April 24th, great day till we got an alarm code. Relaunched on May 1st after finding a loose wire and had no problems!!!

Dennis, Thanks for the measurements! How wide is the inside opening of the channel, and how tall is the rails of the channel? Also and lastly, what is the thickness of the stainless of the roller? Thanks so much for your help! Hopefully if I save a couple of bucks on the roller we can be able...

Would anyone be so kind to take some measurements of an existing anchor roller for a '01 through '04 sundancer 260? A hand or ruller next to it would be great to give perspective. I am trying to get a roller fabricated and they need measurements. Would anyone else like to get a roller...

Would anyone be so kind to take some measurements of an existing anchor roller for a '01 through '04 sundancer 260? I am trying to get a roller fabricated and they need measurements. Would anyone else like to get a roller fabricated? We could share the cost.

Hello, :smt100 Could anyone help me in locating an anchor roller for a 2004 260DA? I just purchased a Maxwell windlass and want to begin to plan my installation now that the snow is gone. I have looked high and low and the dealer option is just way to high priced and the aftermarket ones don't...

Hello, :smt100 Could anyone help me in locating an anchor roller for a 2004 260DA? I just purchased a Maxwell windlass and want to begin to plan my installation now that the snow is gone. I have looked high and low and the dealer option is just way to high priced and the aftermarket ones don't...

Hello, :smt100 Could anyone help me in locating an anchor roller for a 2004 260DA? I just purchased a Maxwell windlass and want to begin to plan my installation now that the snow is gone. I have looked high and low and the dealer option is just way to high priced and the aftermarket ones don't...

I am looking for a bow roller for a '04 260 Sundancer. Does anyone have any information where I can get a used or aftermarket one? Thanks, G

I have a 2004 260 and had to buy a trailer also. Looked at all models and ended up with a bunk tandem axle aluminium I beam trailer. It has a max gross weight of either 12k or 15k but I have it registered for 10k lbs. I chose the tandem rather than the triaxle because of the wear and tear on...