OFFICIAL - 450DA Owner's Thread****

Looking at a 450 DA equipped with what I believe is the FACTORY Pro Mariner 60 Amp battery charger. The label says "3 BANK" does this equate to one bank charging the generator battery?

RWS
 
Maybe A Dancer said:
Looking at a 450 DA equipped with what I believe is the FACTORY Pro Mariner 60 Amp battery charger. The label says "3 BANK" does this equate to one bank charging the generator battery?

RWS
Click to expand...

I still have my original one and that is my understanding without reviewing the wiring schematics.
 
Maybe A Dancer said:
Looking at a 450 DA equipped with what I believe is the FACTORY Pro Mariner 60 Amp battery charger. The label says "3 BANK" does this equate to one bank charging the generator battery?

RWS
Click to expand...
Maybe it's 3rd bank output is for a thruster battery bank as the generator should charge it's own battery. But as Mark said, without reviewing the wiring diagrams?
 
I have the BP278S in my hand. Red three blade. However, when you run that number, it shows that the Vetus BP278S was replaced by the 6 blade Vetus SET0088. 6 blades - must be twice as good!
 
It's 7". My 450 in is on the hard here, so let me take a measurement of what's physically installed. I also have the original Vetus manuals onboard. Standby
 
I slid the 7" BP278S prop into the tube and it fit snugly. I have two chipped blades also, so I'm going to order the 6 blade Vetus SET0088 and keep the 3-blade as a spare. I've attached the image of the dry-fit

Q7Bd8K1.jpg
 
Started winter work on the boat. First order of business is to reupholster the starboard wall panel, going to use channeled vinyl and the same gray piping I used on the seats last offseason. Want to rebuild the cubby with the double cup holder. Maybe put a small light on top of the cubby., and probably use the aquamarine deck flooring on the base and sides of the cubby. About 3000 staples to remove…. Then the easier port side piece is up next.
 

Attachments

  • 09AA6AD5-1EE7-4D34-8D44-8DE990AF2573.jpeg
    09AA6AD5-1EE7-4D34-8D44-8DE990AF2573.jpeg
    405.3 KB · Views: 79
  • B9C6A764-1228-419B-911C-4060FB30E2AB.jpeg
    B9C6A764-1228-419B-911C-4060FB30E2AB.jpeg
    272.5 KB · Views: 82
  • 59EC12F4-6796-47AC-B4B3-D056ED3092AF.jpeg
    59EC12F4-6796-47AC-B4B3-D056ED3092AF.jpeg
    147.6 KB · Views: 86
  • 542454F8-A851-480A-B171-53C8C1E7ED64.jpeg
    542454F8-A851-480A-B171-53C8C1E7ED64.jpeg
    131.3 KB · Views: 83
  • 2E3D23F0-1D69-4DAB-9433-3BBC87E5CF7F.jpeg
    2E3D23F0-1D69-4DAB-9433-3BBC87E5CF7F.jpeg
    159.8 KB · Views: 82
DowneastSeaRay said:
I slid the 7" BP278S prop into the tube and it fit snugly. I have two chipped blades also, so I'm going to order the 6 blade Vetus SET0088 and keep the 3-blade as a spare. I've attached the image of the dry-fit

Q7Bd8K1.jpg
Click to expand...
mine looks different, its 6 blades with a bronze insert keyway
 
I am in the process of selling my 2012 390. I have my eye on a 2011 450DA gas/sterndrive boat. 275hr on motors and 195 on generator. Would love any feedback both negative and positive on this model. Layout looks really perfect for us.
 
DowneastSeaRay said:
I slid the 7" BP278S prop into the tube and it fit snugly. I have two chipped blades also, so I'm going to order the 6 blade Vetus SET0088 and keep the 3-blade as a spare. I've attached the image of the dry-fit

I matched up my old one it’s 246mm or about 9 inches.
I picked it up on Amazon
Q7Bd8K1.jpg
Click to expand...
 

Attachments

  • 1C95D08A-53EA-4C80-9208-407743DD093B.jpeg
    1C95D08A-53EA-4C80-9208-407743DD093B.jpeg
    340.3 KB · Views: 56
redlightning said:
I am in the process of selling my 2012 390. I have my eye on a 2011 450DA gas/sterndrive boat. 275hr on motors and 195 on generator. Would love any feedback both negative and positive on this model. Layout looks really perfect for us.
Click to expand...
Wow. Had no idea that they had gas and stern drives in a 450
What outdrives??
 
Hi Mark
Wow yours is 4 blade
Do you bottom paint it?

also I was going through the thread again and I saw your cockpit table it looks amazing
Can you post more pics looks to be a great winter project

Saverio
 
You must log in or register to reply here.

Forum statistics

Threads
113,173
Messages
1,427,896
Members
61,086
Latest member
MrWebster
Back
Top