Recent content by naviro

i replaced the dash panels and the EIMs, and from the dash panel all accesories function well, but in the cabin the bilge seleinoid open the window, what else I cand do? please help.

Scott: Did you solve the problem, I have exactly the same problem, but at the third day the dash was not powered, please help

Did you solve the problem?, I have exactly the same problem, but at the third day the dash was not powered, please help

Did you solve?, I have the same problem but will all dashboard (i replaced them and nothing happen)

Scott: I have the same problem as you mention with the dash panels (i changed and the problem is the same), how do you solve the problem please?

Scott: I have the same problem, but i have power but if I press the navigations lights start other accesories, the anchor doestn start and later start is like crazy, please help. Do you solve your problem, how

I compared the last week with a friend’s boat (He has the same boat and motors Mercruiser 8.1), and the conclusion is steam. Thanks for the info.

I would like to know the temperatures at which my engines should work (8.1 Horizon 370hp). At low speed (900 RPM-1100RPM) the system show me 70 degrees (158 Fahrenheit) starboard, 72 (162 Fahrenheit) degrees to port. When I start up the power at 3000rpm, the temperature rises to 77 (170...

I would like to know the temperatures at which my engines should work (8.1 Horizon 370hp). At low speed (900 RPM-1100RPM) the system show me 70 degrees (158 Fahrenheit) starboard, 72 (162 Fahrenheit) degrees to port. When I start up the power at 3000rpm, the temperature rises to 77 (170...

I have a sundancer 340 2006 with mercruiser 8.1 horizon and I can’t find the full synthetic oil 20w-40, but I have the following alternatives: Mercury/quicksilver 25W-40 synthetic blend VALVOLINE FULL SYNTHETIC PREMIUN BLUE SAE 5W-40 DIESEL What do you can recommend me?. Thanks in advance

when i put on the preheat i dont see the blue light in the button, is this normal?. Where is the braker in the generator mention by srt8? The GEN Button in the right size have to be on or off? Sundancer 340 8.1 twin merc 5 Kw Kholer

I need to put on this button GEN in the selenoids and after that preheat and Start the Generator?

I bought a second hand sea ray and i am trying to start the generator as the manual shows, but nothing happens when i turn the preheat button and the start button at the left part of the pannel. In the selenoids i can read stbrd port and Gen, I dont know When i have to turn on this button (GEN)...