Recent content by Memike

No one knows?

Hi guys. My Kenyon kiss is leaking like hell everywhere. I was near to blow up the whole boat when i was testing this gas stove in my Sea ray Sundancer 240. Is anyone know if it possible to buy a new one or similar some place on the internet that are shipping to Sweden? Here in Scandinavia...

Long time no see guys. I just forgot to update my thread here at CSR. But this problem was deeper than filter, fuelpump, etc etc. It was a leaking cyl top and the valves was like chantarelles. My mechanic sad it was cheap shit from china that someone has put in there before i buy the boat :(...

Ok, I have the "crab" style lid so it must be the same as #6 post. Took a picture before I unscrewed it so it should be able to get to almost completely 100%. However, there was some moisture etc inside the distributor. se pic. I wonder if that is so good to have there?

Okay, how is this timing work and set up?. I had out of the whole bar/rod, but lowered it as before so it went in. However, I do not know if the rotor/dist itself ended up exactly on mm equally. How to set this up.

Ok, but according to my No on the pump it is a low pressure pump (861155-2) is the no on the pump and according to that it will be low pressure, with threads in the brass / thinner part of the pump. So i don´t get it should i buy a low pressure or high??? really confusing. /Mike

Thanks, So it´s OK? I getting a little confused there, because i have a problem that my engine is not reving up more than 3000rpm and 24 knots. Then i saw this and thought i hade found my problem. But ok this is not my problem. I think i should go a lesson in google correctly, This pic i not...

Hi Guys. I started to tune up my Merc 5.0 MPI engine yesterday. And get really confused over some things. When I had replaced spark plugs and ingnition wires, I start to look at the distributor lid and see that there is a sensor there that is not connected with any cable. Have looked online...

Hi guys. Am really confused about my boat and spare parts. I have a 240 DA from 2002, with a 5.0l MPI engine. When I check the engine number it says it should be a high pressure fuel pump. When I then hit the pump's number it says it is a low pressure pump. What is right? Should i have a High...

Now i nearly got all new parts, waiting for the cap and rotor. Then we have the answer if it is a gasoline or electric failure or worse somthing more mechanic with the engine. I´m going to change following and have already change. Going to change: * Rotor + cap * Ignition wires * Map sensor *...

Are you sure its ok to set that adapter after the high pressure pump?

Aha, i think it will be totally impossible to find one in Sweden. Now i have order a new knock sensor, map sensor, rotor and ignition cap and a fuel pump. I´m going to comp test all cyl and the pressure of the fuel aswell. But if i can solve it with this it will be worth it. What was the...

Hi. Anyone in here who knows where the knock sensor is placed on a Merc 5.0 MPI engine from 2002. Can't find this in the manual or when I search on google. /M

Ok, so the symptoms were the same? I guess theres no fault code if i try to read the engine because i Have no failure alarm noising. How did you go about finding out that it was the fuel pump? /M

All the ignition cables are changed for 3-4 years ago to org Mercruiser. I dont know yet, next week i Will go up to the west coast and see. (2,5h drive) frome Here) that also a issue :)