Recent content by Jocomo

I think I have the reverse problem. My head has an electric motor flusher and it flushes away the water fine, but when the water returns it often will fill to the very top of the bowl and sometimes overflow. Is there an adjustment somewhere that anyone can suggest? Thanks

That's the Teak pattern

http://picasaweb.google.com/lh/photo/0GW214nUKBYf9EDqGQSR-g?feat=directlink

Hi Scorpio, I was able to pull the carpet up relatively easily. Underneath was fiberglass on top of plywood. It was pretty flat and level once I used a scraper to remove the glue remnants from the carpet. I didn't see any need to do any sanding or filling. Then I put down a layer of the foam...

I have about the same questions, but for a 1989 Sundancer 300 with Twin Alpha Drives 5.7 liter. One of my fuel guages doesn't work, so knowing what the average GPH based on certian rpm's or speeds would be very helpful if anyone has an idea. Thanks in advance!

I got my insurance through Progressive and they required no survey what so ever. I'm in Oregon too. I have an 89 sundancer 300. thought I'd mention it to ya.

Thanks. My next project is going to be to put down a new floor with a Teak pattern from Allure. It's a vynal plank product. Then new carpeting on the verticle walls of the cabin. We'll keep you posted.

Thanks it was fun to do and pretty easy.

I peeled off the paper surface of the counter tops in the forward berth. Particle board underneith. Made a template out of thick paper and cut Cherry Veneer and put down with contact cement. This is a photo of the first layer of Cetol that I used for the finish...

OK, the verdict was that after the Manifolds and elbows and flapper were replaced, everything seems to be working fine with the engine. So that must have been the issue. Nothing a few grand didn't fix. I guess it's better than a totally new engine. We'll see in the long run. Hopefully it...

They are still working on it. Hopefully I will have an update by the end of the day.

Since this post was last year, I'm curious if you found a resolution and what is was. Mines doing the same thing.

I'll definitely post pics of my project when I get it started. I'm going out there today to pull off some of the carpet to see how it looks underneith.

I was planning on pulling up the carpet on my 89 Sundancer 300 and putting down the Allure product that looks like wood. If anyone has any tips before jumping in, that would be great. How many boxes to get? Underlayment? Trim ideas? Thanks!

I had an engine that was working. I stalled it out and couldn't get it started again. Cranks but doesn't start. We did get it to start briefly, but would stay running. Anyway, my mechanic supects that water has started to leak into the engine from the Manifold. This may be causing rust in...