I just changed the oil in my 228HP 305 motors. The oil filters are a pain to get to as I get older. Has anyone installed a kit to relocate the filters?
I think most of the lights were from Attwood. Try calling 616-897-9241 or 616-897-2225 (Jamie)
Its been a few years but Jamie helped me with most of my lighting problems.
I started replacing some of the laminated boards on our boat. I carefully removed the teak surround of each panel. I bought a 4x8 sheet of laminated birch plywood. I then cut the Birch panels to the same exact size.
I used a stain called Zarn for matching to teak wood. I stained the plywood...
Like mentioned above the flocking is mainly for the window to slide in. Make sure the drains are open. The seal that wraps around the lower portion of the window is more than likely the problem. I just cleaned that area up on my boat. If you push in on the window you will see the seal pull away...
I'm having the interior recovered in the cabin. I did not want to replace either the carpet or the headliner. They are in good shape and I want to keep it to one project at a time.
The aft cabin design was not working for us or our kids. I think it was a bad design from the beginning. The little...
I figured I would start a build/update thread.
My first little project is figuring out the gel coat color. Anybody know what color this is? Photo Bucket is not working correctly so I can only load one picture right now.
I have cut all new foam for my aft cabin. If you want any of the smaller pcs you are more than welcome to have them. I think I can ship Spee Dee to you for next to nothing. I'm doing my aft differently than what is factory. Looks like things are coming along great. Make sure your carb goy seals...