I bottomed out my 2007 Sea Ray Sundancer 240 and was able to raise my alpha 3 drive but now it won’t lower. My hydraulic fluid leaked into the bilge. I would hear gurgling coming from the bilge when I would try to raise or lower the drive. The fluid all leaked out eventually into the bilge. The hydraulic fluid hoses go from the pump under my inboard and into a hole in the stern leading out to the drive. I felt the hose and couldn’t feel any punctures. Is my problem a punctured hose or something else? Am I able to replace the hoses without removing my engine? A mechanic told me that I would have to remove my inboard. Someone else said I would need to remove both the inboard and drive. A third said that there should be a way to remove the hoses without taking out the engine and/or drive. A lot of mechanics just want to take my money so I would rather fix this myself if I can. Someone else said that maybe my trim cylinder rams need to be replaced. Any help would be appreciated. Can I do this repair myself?