Are you talking about the gaskets between the porthole window & frame?

Sent from my SM-G930V using Tapatalk

 

Take a look at these 2 threads.

http://clubsearay.com/showthread.php/58324-Rebedding-Portlights-with-New-Gaskets-amp-Screens

http://clubsearay.com/showthread.php/45694-Porthole-leak-How-to-fix/page2?highlight=porthole+gasket

 

A word of caution. When you get them out there are little tiny "nuts" that are real easy to lose. Some will be embedded in the old caulk. If you lose any, you will have to fabricate them as I could not find them anywhere

 

Have you tried "release" ? It's expensive but works to get the old caulk to give it up

 

Might be another of the "one & done" fellas as this was his first ( and only) post thus far.

Sent from my SM-G930V using Tapatalk

 

Not a wasted thread though, as I will be doing this same job soon. The information is much appreciated.

 

Where can you get replacement gaskets? All the previously posted links are no longer available. I need to replace the portlight gaskets on my 98 450DA.

 

This thread has the information you need: http://clubsearay.com/showthread.php/73845-Portlight-screens

 

Hello, I keep following the links above to get advice on replacing the screens/gaskets on our 98 400 EC. Any new advice?