Club Sea Ray banner

Conversion to LED Lighting

4.2K views 18 replies 10 participants last post by  JVM225  
#1 ·
I would appreciate any help anyone can provide.

I have attempted to search and drill down to find the info on the conversion to LCD I require but it seems somewhat scattered.

What I am trying to find is part numbers for the replacement of all of the bulbs on the boat to LCD.

Going through my manual , 2006 380 Sundancer there are 5 different bulbs on the boat.

As described in the manual they are;

1. Bulb Xenon 12V/20W
2. Tebe/Charly Boy/sampei/David
3. Bulb Xenon 12v/10w
4. Bulb Dome Light 12 V
5. 0137380/0783670

Can anyone provide LCD part Numbers or descriptions for these ?

Thanks so much,
Mark
 
#2 ·
#6 ·
The types of lamps on our boats can be so variable depending on year, location, etc. When I started my conversion process I grabbed one of each type of lamp and went to West Marine to confirm which ones I had. Then I bought them all from Amazon. I'm a very visual person :)

West Marine gets plenty of my money so I didn't feel guilty not buying from them in this case...
 
#19 ·
This is the second boat that I have changed all the cabin and cockpit courtesy light on. Got all of them on Amazon for both boats.
Never had any interference at all on either boat.
Never swapped out any gauge lights to LED so couldn’t swear you wouldn’t get interference from gauge lights that might be in close proximity.
Never worried about swapping gauge or running lights to LED because the motors are always running when they are on anyway.
The only incandescent bulb that burns when the motors are off is the anchor light and for the number of overnights we do a year on the hook I’m not worried about it.