wish2fish
Active Member
My 2003 Bravo III outdrive is showing some signs of corrosion. The boat is kept on a solar charged 12v hydraulic lift. The only time the outdrive is is the water is when I am using it. Freshwater use only, Ohio River.
First, I have included a picture of 3 of the zincs. The 2 on the other side look the same as the hydraulic and cavitation plate zincs. There isn't a prop zinc. Are the zincs in good shape. Do I need to replace?
Is there something else I should be looking at?
Here are the pictures showing the corrosion on the outdrive. planning on sanding and repainting before launching.
Outdrive fluid drain
First, I have included a picture of 3 of the zincs. The 2 on the other side look the same as the hydraulic and cavitation plate zincs. There isn't a prop zinc. Are the zincs in good shape. Do I need to replace?
Is there something else I should be looking at?
Here are the pictures showing the corrosion on the outdrive. planning on sanding and repainting before launching.
Outdrive fluid drain