Steve Craig
Member
Have a pair of rubber turn knobs moulded over 3/8" bolts on the rear tower supports.
Bolts are seized but knobs will turn with a strap wrench on them. Thinking they have a hex head on the bolt moulded into the knob.
I have replacements & anti-seize to go with them.
Anyone ever have one of these apart ?
Like to know what I'll find once I cut the rubber knob off.
Hoping to get a socket over the hex-head bolt.
Thank You
Bolts are seized but knobs will turn with a strap wrench on them. Thinking they have a hex head on the bolt moulded into the knob.
I have replacements & anti-seize to go with them.
Anyone ever have one of these apart ?
Like to know what I'll find once I cut the rubber knob off.
Hoping to get a socket over the hex-head bolt.
Thank You