ds480
New Member
ok...this thing is becoming a nightmare....i have tried everything i know to fix it...the switch on the dash is all molded to gether with all the other switches and only 4 wires go to that whole cluster ...so there is no way for me to rule out the switch...i have taken a 4 gauge wire and jumped the solenoid and the switch on the dash will lower the anchor no problems, but when you go to bring the anchor up it trips the 5 amp fuse in the forward AIM. I can reset that and get it to bring anchor up about 2 foot and it trips again...i tried putting a new solenoid on it...no good. I know the forward control module is not bad because it works fine when i jump the solenoid. any one got any ideas...i hate to buy that instrument cluster and that not be the problem.