Will switch pad 2118096 work in place of 2118093

[Ronimal]

Hi All,

Wondering if anyone out there knows if starboard switch pad from dna group, 2118096 will work in place of 2118093? Sea Ray online support didn't give me much help. Thank you, Ron

 

[Jcrew]

Unfortunately the answer is no. They have different revision numbers and that’s what must match. I’m in the same boat looking for that keypad

 

[Ray Uli]

Hello fellas, having same issue. 2118093 discontinued and no luck anywhere online. Found 2118096 and seems like would work as only button position changes but since all functions go through 2 wires to the EIM, was hoping would work. Was anyone lucky enough to find one anywhere? If you were, can you share where or if not, what you did to keep going? I took my panel apart, found few resistors corroded and broke off the board when I peeled the epoxy off of it (yes I know they aren’t meant to be opened but since it doesn’t work, I had nothing to lose) after re-soldering few components I am at least getting some lights to come on, but only when I’m bending or flexing the actual board since it’s out of the panel…so assuming I’ve got some internal connection issues within the board itself.

 

[Ronimal]

Hello fellas, having same issue. 2118093 discontinued and no luck anywhere online. Found 2118096 and seems like would work as only button position changes but since all functions go through 2 wires to the EIM, was hoping would work. Was anyone lucky enough to find one anywhere? If you were, can you share where or if not, what you did to keep going? I took my panel apart, found few resistors corroded and broke off the board when I peeled the epoxy off of it (yes I know they aren’t meant to be opened but since it doesn’t work, I had nothing to lose) after re-soldering few components I am at least getting some lights to come on, but only when I’m bending or flexing the actual board since it’s out of the panel…so assuming I’ve got some internal connection issues within the board itself.

Contact Blink Marine in Chicago. They rebuilt my pad for me and has been working fine

 

[Ray Uli]

Thanks! Yes I saw his name in this thread and been in contact with them. Thank you again