Where does this cover go??

[Jcc0016]

Came across this cover in the engine bay, but can’t seem to find where it goes. Thanks.

 

[JHornsby3]

Thats the cover for the kanooter valve.


Sorry couldn't resist. A google search came up with the cover for the cool fuel dilly bop. But I didn't look too far.

 

[Island Time Buffalo]

Thats the cover for the kanooter valve..

No Way!! That cover had 3 slots for the optional Turbo Encabulator interface. That's the Muffler Bearing Grate Cover.

 

[JHornsby3]

No Way!! That cover had 3 slots for the optional Turbo Encabulator interface. That's the Muffler Bearing Grate Cover.

Naw, there's no ventilation fairings for a muffler bearing grate. But you might be on to something with the encabulator interface.

 

[Island Time Buffalo]

Naw, there's no ventilation fairings for a muffler bearing grate. But you might be on to something with the encabulator interface.

It depends on the year. If the exhaust is above water there would be fairings, but if it's below the water line you wouldn't necessarily see them as they are hidden by the reciprocation dingle arm

 

[JHornsby3]

But wouldn't the dingle require a chingamadatis extention to oscillate the vapor due to the unobtainium structure?

 

[Island Time Buffalo]

But wouldn't the dingle require a chingamadatis extention to oscillate the vapor due to the unobtainium structure?

Sunuvabitch ... I think you are right. That was after the great polar oxidation incident of the late 90's .... sent the engineering team all the way back to the flugensheist era.... that was pretty bad.

 

[Nater Potater]

I gotta' admit; this is better than all the politically-driven threads that have been going around lately...

 

[370Dancer]

Ya'll wrong. Flux Capacitor cover.

 

[JimG]

Obviously a cover for the cool fuel system:
https://www.ebay.com/p/12015288050

 

[JHornsby3]

Ya'll wrong. Flux Capacitor cover.

Pft! Rookie!

The flux capacitor didn't have a cover. The heat generated would have melted it. Those get almost plasma hot.

 

[bobeast]

Isn't that the cap for the blinker fluid cooler?

 

[DWABoat]

You guys are real d$&ks!
I love it.

My turn…

Obviously, very plainly, it is the cover for the Torque Flatulation Integration Unit that runs between the Water Hydrator and Heat Warmer.

You guys are such rookies at boats.

 

[OllieC]

This equation will tell you exactly where it goes, once you discover the value. If 3x−y=12, what is the value of 8x/2y?

 

[Espos4]

This equation will tell you exactly where it goes, once you discover the value. If 3x−y=12, what is the value of 8x/2y?

That’s easy……..potatoe

 

[JHornsby3]

That’s easy……..potatoe

If you use common core like you should these days. That answer would be four purple twinkies on the tank of a rose colored toilet.

So much learning that needs to be done. So little time.

 

[techmitch]

I think it's the cover for the wrenchedankle.

 

[OllieC]

That’s easy……..potatoe

"spoiler alert!"

 

[Blueone]

oh no.....lets not turn into facebook

 

[JimG]

Yeah, this guy will likely never post again!