Where can I get parts for my 2007 38 Sundancer

[bmedeiros]

Where can I get parts for my 2007 38 Sundancer? I have called my local dealer and have not had any success. I needed a replacement Galley faucet called my local dealer and they never called me back.

My CoolMatic-RSD-115 stopped working. I looked up my local dealer / repair shop from the WEACO web site. They told me they can't repair it. I called my SeaRay dealer and they told me they can't get the Refrigerator. And by the way SeaRay doesn't have any replacement that will fit into the original space.

Can anyone help me? This is my first large boat and I thought that being an 07 parts would still be around. I didn't think that it would be so hard.

Bob Medeiros

 

[mistercomputerman]

I think you are trying to make this too complicated. Sea Ray did not manufacture the parts you are having a problem with. Take the faucet to any reputable plumbing house and buy a replacement just as you would do at home.

For those of us that have had fridge failures, we replaced with one that fit the space/opening from any fridge Vendor of your choice.

 

[Blueone]

Try www.fpmarine.com they have a seperate Sea Ray page

 

[bmedeiros]

I know that I am making it too complicated. I just wanted to try and keep it looking and working well with original parts. I thought that SeaRay would have after market venders where you could get these items.

I guess being a very recent purchase 3/2015 I wanted to keep it in that condition.

Thanks
for the response
Bob Medeiros

 

[Blueone]

Here is another place I just used to match my faucet

http://www.replacementboatparts.com/folddownfaucet.aspx

 

[JVM225]

Look in a home center for a replacement faucet. They are all either 4" or 8" spread. Get one you like, and that fits, and you're good to go.
The fridges are manufactured by third parties. You can check their current models fo a replacement that fits your opening, or you can get one from a different manufacturer that may be a slightly different size which you can adapt to fit in some way.
The hard stuff like furiture, cabinetry, doors, etc., are usually make and model specific. Boat manufacturers rarely stock replacments for this kind of stuff after a model changes design.
Most other stuff (especially mechanical type things) is made by a third party and can be secured locally, or through vendors on the internet in many cases.

 

[juggernaut1]

I also recently picked up the same boat (2006) - some small items I've been able to pick up from Flounder Pounder and Boat Outfitters. However, the microwave no longer works and its usually a case of finding what fits in the same space from another manufacturer (if you're lucky) or having to do minor woodwork. I managed to find a Sharp microwave locally which will fit. Analog TV's and DVD swallowing DVD players are next on the hit list.

 

[bmedeiros]

Thanks, I have the same issues of replacing the Analog TV's. For now I run the antenna into a analog to digital converter. This allows me to watch TV however all of the TV's are displaying the same show. I'll have to start replacing them one at a time.

bob medeiors

 

[wayne0]

Where can I get parts for my 2007 38 Sundancer? I have called my local dealer and have not had any success. I needed a replacement Galley faucet called my local dealer and they never called me back.

My CoolMatic-RSD-115 stopped working. I looked up my local dealer / repair shop from the WEACO web site. They told me they can't repair it. I called my SeaRay dealer and they told me they can't get the Refrigerator. And by the way SeaRay doesn't have any replacement that will fit into the original space.

Can anyone help me? This is my first large boat and I thought that being an 07 parts would still be around. I didn't think that it would be so hard.

Bob Medeiros

Have the fridge repaired by a reputable repair shop or person. Hell of a lot cheaper than replacing it!