Where can I get OEM SR hull tape?

[Alex D]

MArina did some work and did not fender my boat while on teh floating dock. So the dock bumper strip rubbed and damaged some of my hull tape.
I have gold/dark blue. Anyone know where I can get this tape. I think it actually comes together as both tapes and pre-spaced on a backing/carrier.

 

[Skuza]

Check out a local autobody collision shop. They should have a guy that does tapestripes that can hook you up. We run a collision shop and got ours from our local guy. The stripes were seperate and kinda a pain to put on straight. Just gotta measure and lay out some tapelines to follow. Good luck!

 

[Alex D]

I have had great luck finding the stripes at our local SR dealer. B&E Marine. Their phone number is 219-879-8301, or BEmarine.com

Great idea! I will check with them.

 

[Newbie]

Alex, SMYC or whatever their new name is can order it for you from SR. Just be sure you're sitting when the gal give you the price, it roughly $400 + or - a few. My dealer down here at the coast usually has some pieces of it laying around, if your damage is not too bad you can cut and splice and no one will ever notice. I can check if they have some and bring it up in a few weeks if they do.

 

[Alex D]

Alex, SMYC or whatever their new name is can order it for you from SR. Just be sure you're sitting when the gal give you the price, it roughly $400 + or - a few. My dealer down here at the coast usually has some pieces of it laying around, if your damage is not too bad you can cut and splice and no one will ever notice. I can check if they have some and bring it up in a few weeks if they do.

I also wote BOE our forum sponsor. I only need about two feet of the tape to repair the damage, not a full length. It is very thin tape that spilces well. MAtter of fact there is already a spliced section on my boat.

 

[Hampton]

I had mine custom made at a local sign shop for $1/foot. I spliced in 2 sections. It looks great.