Where can I buy just a table top?

[alwhite00]

Looking for something in the 16 x 28 - 18 x 30 range - You know, The rectangular or oval with the cupholders - White plastic. I just am looking for the top - Not the "kit" with the pedastal & mounts. Does anyone sell the top seperate?

LK

 

[Henry Boyd]

For plastic tops you might try the usual suspects like West, or some of the can boat suppliers, although you may have to buy it with the mounting hardware. If you want to go with wood, there are a number of sources that sell just the top. I also make tops for friends from time to time. I have a teak top that is very close to, or matches your dimensions.

Henry

 

[Ididntdoit]

I have a stock 2005 300 da table only - no hardware - per another thread on here its 20 5/16 x 29 3/4 shoot me an offer via pm

 

[Jimmy Buoy]

I purchased my table top from Great Lakes Skipper (saw it on E-Bay). Their stock changes regularly and if you see something you like, don't wait to purchase it later. When they're gone, they really are gone!

http://greatlakesskipper.com/produc...chts-54-inch-x-33-14-inch-boat-table-top.html

 

[penguin]

Lowes and Home Depot have wood tops in those dimensions. Sand off the corners and edges to a nice round. Then, get yourself a can of white Interlux paint. Two coats with a roll/tip method and it will look like plastic. Here is a 24x36 I made for my back deck.

http://www.nofone.org/gallery/d/33115-1/IMG_1259.jpg

 

[Jackie J V]

I was also going to recommend Great Lakes Skipper. If you're patient, you might want to monitor eBay for a while. That's what I did and now have a spectacular inlayed maple table in the bridge and teak table in the cockpit. You might also want to consider your requirement as an opportunity for an upgrade.

Paul