Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
My waste level indicator (light) always show empty (green light)...it never go 1/2 or full...any ideas why it does'nt work ?
I just changed my vent filter...thanks, Hugo
i got tired of those lame SR indicator lights that never seem to work. installed the smart mini...
http://www.snake-river.org/Products.asp
completely EXTERNAL (so no more snagged sensors) and a much better indicator of how many flushes left til you OVERFLOW! you pick up power from the existing sensor wires at the tank and leave the old sensor for dead inside the tank. no muss, no fuss. cant beat it for the money.
My waste level indicator (light) always show empty (green light)...it never go 1/2 or full...any ideas why it does'nt work ?
I just changed my vent filter...thanks, Hugo
How important is adding holding tank treatment? I have never had an issue so never felt the need to add another chore to the list but that dosn't mean I shouldn't be. Thoughts?
Mike, while my boat is older than yours, the indicator is working exactly the same.
When the empty float is "hanging" in the tank, it illuminates the panel bulb for empty. Once the tank fills, and the empty float actually floats it turns the empty light off. You then only see the power light. Meanwhile, the 1/2 full float is normally hanging, which for it is "off" until it floats and it then illuminates that bulb. Same as for the full light.
Absolutely right, when using the TankWatch three-probe system. There are variations, but this one is common on sport cruisers. When I did not trust mine, I had a SeaLand service tech take the cap off and he found nothing wrong with the probes at all. His service fee was my tuition for the lesson.