Wanted - Marine spark arrestor, 7.4L Rochester carb

[268 Frakenboat]

Seemed to misplace mine after the rebuild. Mine has the dual breather hoses. I am planning on being on the water first week of July. Let me know what you have, Thanks!

 

[dwna1a]

Do you have a photo of what one looks like? I may have what you are looking for

 

[Bt Doctur]

this

 

[Mike Blake]

Can't wash it out? I do both of mine every year.

 

[dwna1a]

I've got one. Let me check the numbers on mine when I get to the boat in the morning. I will PM you tomorrow. I also need to double check that it has two hose connections

 

[268 Frakenboat]

Thanks!

I've got one. Let me check the numbers on mine when I get to the boat in the morning. I will PM you tomorrow. I also need to double check that it has two hose connections

 

[Lazy Daze]

They should be all pretty much standard. If you end up with the arrestor, but not the "twin hose holder", just get a piece of aluminum flat stock and make one. As I'm sure you're aware there's nothing special to the hose holder. Should take all of about 20 minutes to make one... including the mandatory beer for doing a DIY.

 

[rondds]

Item #24.Part #805298A1. Pricey at around $120.

 

[Bt Doctur]

http://www.boats.net/parts/search/Merc/MIE/1994/3572139GT/FLAME ARRESTOR/parts.html
$3.70 #6

 

[268 Frakenboat]

Thanks for the diagram, that is exactly what i am looking for. I have a line on a used one, chasing it down now...

Item #24.Part #805298A1. Pricey at around $120.