Want to verify part numbers for impeller kit and thermostat

[bamafutbal]

i looked at perfprotech.com and got the numbers
46-807151a7 for impeller kit and
807252t2 for 160 degree thermostat. looks around 100.00 delivered for both

my boat is a 2000 210sd with 5.0 efi and engine # is 0L620229

thanks
john

 

[1stSeaRay]

Roll Tide Roll and you live in Gainesville FL? Must be tough for you living in Gator Country.

 

[Fun Times]

i looked at perfprotech.com and got the numbers
46-807151a7 for impeller kit and
807252t2 for 160 degree thermostat. looks around 100.00 delivered for both

my boat is a 2000 210sd with 5.0 efi and engine # is 0L620229

thanks
john

Wait a minute there that serial number comes back as, ENG:Serial number 0L620229 model number 4M31037M1 MERCRUISER MEFI 3 ALPHA 3" RISERS 5.0L ALPHA EFI.
Manufacture Date 07/28/1999

Your drive is, Serial number: 0L708724 model number is 5121300LS MERCRUISER ALPHA 1.62:1.

Because your drive is an alpha, And the impeller is in between the upper and lower unit of the sterndrive, It should not be mounted to the engine.
You will need to order either number (27) 47-43026T2-- IMPELLER And that should come with the gaskets needed to do a basic job, Or for a complete job done right with housing you will want part number 817275Q05 WATER PUMP REBUILD KIT SS# "817275A4" $153.00 $133.88 From this link.http://www.mercruiserparts.com/Show...c=GEAR+HOUSING(DRIVESHAFT)(STANDARD+ROTATION)

Also you may need service manual part number 90-8181773 STERNDRIVES - ALPHA ONE GEN 2 SERVICE MANUAL #14 from MerCruiser to help you do this job.

Also you will need almost 3 QT's of "High performance gear oil" for your drive, And a pump to pump the oil in from the bottom up.

The part number 46-807151a7 you found is for a bravo style set up, And if you copy and paste your number in this link and click on the photo to the right you will see that impeller housing would need to be driven by a engine pulley.http://www.mercruiserparts.com/partsByNumber.asp


Your good with the thermostat number, But I recommend you also get numbers 3,4,5,6, In this link. http://www.mercruiserparts.com/Show...r=4856&bnbr=150&bdesc=Standard+Cooling+System

Here's a tip, Gasket number (4) goes on dry no "sealant" or you will get a bad reading on your temp gauge, Because of the little rivets in the gasket are for grounding the temp sending units.

If you have any Questions about what gasket comes in a kit call Bam Marine they will set you straight, Here is there information Phone 954 545 8681
http://www.go-fast.com/help_by_phone.htm.
The links I posted are from Bam Marine in FL.

I hope this information helps you out a little bit.

 

[bamafutbal]

thanks boat tech, was beginning to wonder if i need to stay on at iboats to get an answer. looks like you need a 30+ footer to get a response around here. thanks alot for the info, will get the impeller kit and gaskets and sleeve for thermostat

 

[Fun Times]

thanks boat tech, was beginning to wonder if i need to stay on at iboats to get an answer. looks like you need a 30+ footer to get a response around here. thanks alot for the info, will get the impeller kit and gaskets and sleeve for thermostat

:smt018:smt024:grin:
No problem.:smt001

 

[mwph]

looks like you need a 30+ footer to get a response around here.

1.) Roll Tide!

2.) Ease up man. You asked a pretty technical question that needed an detailed response. I'm glad you posted it & even more so that it was answered properly.

3.) Boat Tech..........best, most comprehensive reply we've seen in a while. Thanks a ton for posting. The links alone will give me hours of learning. Thanks again.

 

[bamafutbal]

this forum needs to sign boat:smt024 tech on a dotted line to monitor the posts and give out the almightly correct answers:thumbsup: