Vessel view code

Discussion in 'General Maintenance/Repair Questions' started by Bradb571, Mar 3, 2018.

  1. Bradb571

    Bradb571 Member

    75
    Oct 8, 2007
    Florida
    340 SeaRay Sundancer 2005
    Twin Inboard 8.1L
    IMG_1337.JPG Anybody know what pitot ckt lo means on the smart craft vessel view? I changed the oil and fuel filters in both motors. When I got done, I was getting that error code. I think it has something to do with the water pressure because they're off from motor to motor. Left is running in the 3's and the right is around 12. Thanks in advance
     
  2. techmitch

    techmitch Well-Known Member SILVER Sponsor

    May 1, 2008
    Chesapeake Bay, Middle River/Frog Mortar Creek MD.
    1999 270 DA
    Twin 4.3s W/Alpa I Gen II's
    I think you have two different issues. 1.) The pitot is usually a water pick up tube that feeds a sensor for speed info. to speedometer on outdrive boats. I think you can turn that off in vessel view somewhere. 2.) The low press. readings refer to the pressure the engine water pumps are creating and it looks like your port is low. I'm sure others will chime in to confirm or correct me.
     
  3. Bradb571

    Bradb571 Member

    75
    Oct 8, 2007
    Florida
    340 SeaRay Sundancer 2005
    Twin Inboard 8.1L
    Thanks. From what I can find so far, it looks like the port side water pressure is normal. The starboard side is off. Even with the motors off the right side read 35. The port was at 0.
     

Share This Page

Show Sidebar