Vent covers

[lfd95]

does anyone know the oem for the bilge vent covers on a 1999 340 da they are round and approx 4" in diameter. sea ray part # 791749.... looked around at local vendors and on the wed without much luck many thanks

scott

 

[MasterFab]

I replaced mine over the winter. Any Sea Ray dealer should be able to get these for you. If I remember, they were only about $6.00 each. You need a total of 8. Six of them are easy to change, but you do have to sand a flat section into the flange for them to fit properly in the holes. The other 2 are harder to change, as the bilge vent hoses are attached to them. Access to these is from inside the boat, above and behind the waste holding tank. Unless you pull or move the waste tank, you'll have a hell of a time getting to these.

Dale

 

[lfd95]

Unless you pull or move the waste tank, you'll have a hell of a time getting to these.

Dale[/QUOTE]

thanks dale... i'll get the vents and some motrin.....thanks again

scott

 

[Book'em Danno]

does anyone know the oem for the bilge vent covers on a 1999 340 da they are round and approx 4" in diameter. sea ray part # 791749.... looked around at local vendors and on the wed without much luck many thanks

scott

Got them at Amazon for $5.99 ea. 4" white plastic Grill Vent:
https://www.amazon.com/gp/product/B00FZHC7UO/ref=ox_sc_act_title_1?smid=A183BKJO2E0H7D&psc=1