BAUMANCHUCK
New Member
hi, i have a 97 240 sundancer w/alpha 1 gen 2 o/d. my up does not work, not even a click. down and trailer works. i cleaned all connections at pump and leads connectors to o/d limiter switch.i marked position of unit w/ the drive full down, cleaned base copper that had a light black film. put a jumper at limiter connectors by pump, megged -&+ base contacts wires checked good. hooked back up and worked then cycled and just heard it click, need to know if spring contact should be just on end of copper base? the housing is full counter clockwise. tried small adjustments no luck. i dont know if the new set comes with the proper installation set up. if one has them i could use all the help from you. thanks
