U-Line Icemaker Issue

[Bop]

My ice maker is making lot of ice and is nice and cold but I'm getting a build up of ice at the back as though some water is dripping prior to being frozen I the ice mold. Anyone else have this issue?


Sent from my iPhone using Tapatalk

 

[endless seas]

Call u-line ask for Faye. She knows everything and is great!

 

[Jimmy Buoy]

Might be overfilling the ice mould. There is an adjustment for this behind the icemaker cover to change the size of the cubes. If its set to the "large" setting it may be putting too much water in the mould and overfilling it.

 

[Bop]

Might be overfilling the ice mould. There is an adjustment for this behind the icemaker cover to change the size of the cubes. If its set to the "large" setting it may be putting too much water in the mould and overfilling it.

Thanks. I just called u-line and they said the same thing!


Sent from my iPhone using Tapatalk

 

[gerryb]

I've seen the plastic tube in the back either become out of alignment or actually crack with age. The tube is where the water comes out of and shoots into the tray.

 

[Bop]

I've seen the plastic tube in the back either become out of alignment or actually crack with age. The tube is where the water comes out of and shoots into the tray.

Thanks I'll Check that as well. Initially figured it was a leak like this.


Sent from my iPhone using Tapatalk

 

[Bottom Line]

I will piggyback with a question. My ice maker water line started leaking this past weekend....the leak appeared to be coming from right around the red colored "C" clamp. Anyone else had the same leak? Does the valve need to be replaced?