Trying to find part number for rocker switch for lights in cabin

[Julie Gale]

I am having a hard time finding a rocker switch for interior lights above dinette seating. There are no part numbers on the switch. Just says carling switch on one side and 12 volt Mexico on other side. On/Off only. Illuminated but doesn't have to be. Turns on 2 lights above dinette seating. Lights can be shut off manually on lights. Has 4 pin configuration. Pictures attached. I have reached out to Carling and RS and no one has answers or have not responded to my email. Can anyone on here tell where to find the switch?

Thanks for any help
Julie Gale

 

[Jaybeaux]

I am, by no means, an expert on switches, but I'd bet you can find your answer here:

https://www.carlingtech.com/sites/default/files/documents/Switch_Catalog.pdf

It's just a simple 12 volt switch....SPST....you just need one to "fit the hole".

Good luck,

Jaybeaux

 

[Julie Gale]

I am, by no means, an expert on switches, but I'd bet you can find your answer here:

http://[URL]https://www.carlingtech.com/sites/default/files/documents/Switch_Catalog.pdf

[/URL]

It's just a simple 12 volt switch....SPST....you just need one to "fit the hole".

Good luck,

Jaybeaux

Thanks for the info.

 

[Highliner]

Try FPMarine.

 

[Skybolt]

NewWireMarine has pinout PDF's and all the switches you need. These guys also have a great turnaround time.

 

[Julie Gale]

Try FPMarine.

Thanks I have if FPMarine is Flounder Pounder.

 

[Julie Gale]

I am, by no means, an expert on switches, but I'd bet you can find your answer here:

http://[URL]https://www.carlingtech.com/sites/default/files/documents/Switch_Catalog.pdf

[/URL]

It's just a simple 12 volt switch....SPST....you just need one to "fit the hole".

Good luck,

Jaybeaux

Been there, thanks. No response from company after 2 emails.

 

[Julie Gale]

We could not find the switch with the same blade terminal configuration but we were able to change switches out with different configuration with help from TA Mahoney in Tampa Fl. Thanks for everyone's help.

 

[wayne0]

If you can't find a switch, as long as you know the terminal configuration and hole size, you can find it at McMaster.com.