Loyd Dinneen
Active Member
- Jul 29, 2017
- 484
- Boat Info
- 1977 Sea ray 240 SDA cruiser w/ twin 470 mercs.
- Engines
- Twin 470 Mercruisers
Checked both pucks on outdrive and took them apart and cleaned them and put dielectric grease on the contacts and made sure everything was clean of any rust. Tested the switch again still no change so I starting to suspect the switch just hate get another one for $60.00-$80.00 and find out that it isn't the problem either, don't like throwing money at a problem. How can I test the button switches at the switch to see if they have gone south. Like I said before the bottom button lowers the unit but nothing from the top and center one pushed separatly or both at the same time. It's really a confusing system, I'm really thinking of just using a two way momentary switch and not worry about the in and out trailer function. It is already trimmed in which is how I would run it anyway.