Trim piece replacement. Cockpit 2003 320 DA

Discussion in 'General Maintenance/Repair Questions' started by dpvandy01, Sep 17, 2018.

  1. dpvandy01

    dpvandy01 Well-Known Member

    Sep 6, 2007
    Cincinnati, Ohio/Ohio River
    2003 320 Sundancer
    &
    2012 185 Sport
    &
    2014 Sea Fox 256 Commander
    Twin 6.2L Close Cooled V-Drives & 3.0L Alpha 1, 300 Yamaha OB
    I am looking to replace this metal trim piece. It is n the cockpit of my 2003n320 DA, on the port side. Anyone have a possible source or any tip for possibly re-painting it? I have access to a powder coating booth/oven. Thoughts?
     

    Attached Files:

  2. dpvandy01

    dpvandy01 Well-Known Member

    Sep 6, 2007
    Cincinnati, Ohio/Ohio River
    2003 320 Sundancer
    &
    2012 185 Sport
    &
    2014 Sea Fox 256 Commander
    Twin 6.2L Close Cooled V-Drives & 3.0L Alpha 1, 300 Yamaha OB
    upload_2018-9-17_19-48-15.png
    Here is the correct orientation
     
  3. gerryb

    gerryb Well-Known Member TECHNICAL Contributor

    Oct 12, 2006
    Somers Point, NJ
    "On Vacation"
    2006 40 Sundancer
    Raymarine E125 & HD Radar + Garmin 5208
    QSB5.9 380 Cummins
    Would seem like an easy part to repair vs replace. Aircraft paint remover. Sanding and then a nice white powder coat and baking. Might be able to prime and paint with enamel as an alternative to the powdercoating. I'd do a few other pieces at the same time, during the off season.
     
  4. KevinC

    KevinC Well-Known Member

    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    1988 Proline Center Console - 90hp Mariner/Mercury
    1969 Boston Whaler
    Twin 8.1 V-drives
    +1 Strip and Powder Coat.

    -Kevin
     
  5. grettberg

    grettberg New Member

    19
    Aug 2, 2009
    Cheasapeake Bay
    2004 280 Sundancer
    496 Mercruiser w/ Bravo III
    I replaced a few of these frames a few years back due to the paint bubbling and peeling. I got in contact with Teak Isle the supplier. I gave them the sizes, they sent me their drawings to check to. I ordered 3 of the frames and swapped them out. Straight forward to do too. One of their drawings is attached. I don't know if they are still in business
     

    Attached Files:

Share This Page

Show Sidebar