Charterproinc.
Member
- Nov 22, 2015
- 32
- Boat Info
- 1997 400 Sundancer, original electronics package with Garmin upgrade
- Engines
- Twin Cat 3116 diesels
Purchasing Raymarine Axiom+RV MFD for my 1997 400DA. As the boat is far away covered with snow, I cannot get a good look at the hull. Raymarine offers an RV300 thru-hull transducer that handles all features of the MFD however is designed to be used on a flat spot on the hull as it has a 0 degree offset. Has anyone mounted a similar transducer and found a suitable location? The next option is a pair of off-set transducers and now getting very costly, OR a simple thru hull unit that flush mounts and only offers standard depth, no down, side or "realvision.
I could be satisfied, with just regular depth, temp and down image, fitting my travel and limited fishing needs on the great lakes. Other companies show units like this but not Raymarine for the Axiom +RV. Advice anyone on a mounting spot?or must one get a transducer with an offset for my hull with a 19 degree deadrise..Bottom line to this, does anyone know if there is enough of a "flat spot" under an excessible area in the bilge to mount a 0degree transducer
I could be satisfied, with just regular depth, temp and down image, fitting my travel and limited fishing needs on the great lakes. Other companies show units like this but not Raymarine for the Axiom +RV. Advice anyone on a mounting spot?or must one get a transducer with an offset for my hull with a 19 degree deadrise..Bottom line to this, does anyone know if there is enough of a "flat spot" under an excessible area in the bilge to mount a 0degree transducer