I cannot figure out how to get the handle off of the throttle body. Had cables greased recently but still hanging up inside handle. I can see screws loose on the inside of the handle but cannot access without removal. Would like some help on disassembly. Thank you
Throttle body removal
- Thread starter Boondox
- Start date
Hoplite808
Well-Known Member
- Jan 11, 2022
- 507
- Boat Info
- 1996 Sea Ray 270 Sundancer
- Engines
- Mercruiser 7.4 LX MPI EFI (Gen. V)
This is a different control module but disassembly might be similar.
https://www.discount-marine.com/club/files/mercruiser.pdf
https://www.discount-marine.com/club/files/mercruiser.pdf
Bill Curtis
Well-Known Member
- Mar 24, 2022
- 1,014
- Boat Info
- '95 220 Overnighter
454 Mag. Bravo3 w/ 2.0:1 gears and 28 pitch props
- Engines
- 454 Mag Bravo3. 2.0:1 ratio gears w/ 28 pitch props
Looks like the same one as on mine. It's a Classic 3000 model. Disassembly is as Hoplite808 shows.
I have to 3000 manual if needed, but it is over 8 meg and too big to post here. Fairly they are easy to find on net
I have to 3000 manual if needed, but it is over 8 meg and too big to post here. Fairly they are easy to find on net
