Old Blue
New Member
- May 1, 2012
- 46
- Boat Info
- I am restoring my boat that I picked up last year its a 1987 Sea Ray cuddy cabin 230
- Engines
- 350 Chevy Mercury out drive
ust installed new teak on my 87 SR and sanded what I could re-use. I cleaned and oiled it (3 coats of oil). After it has been on for about 30 days it has lost its texture. Is their a product out there that I can put over the oiled teak that the sun and water will not harm the teak and give it its texture back. It was a lot work and time installing and I would sure like to show it off. Thanks for your replys in advance.