sarbog
Member
- Aug 22, 2008
- 135
- Boat Info
- '05 340 Sundancer
Garmin 7610xsv
1951 Penn Yan 9' Aerodinghy/2018 AB 9vl w/ 15 hp Evinrude 2-strk
- Engines
- Twin 8.1 Horizons v-drives
I have an '05 340 Sundancer with the original Raymarine c80 plotter. I am planning to put in a new Garmin. My inquiry is if anyone has switched and if the plotter's I am considering will fit where the c80 currently is placed? The Garmin units being considered (with size specifications) are:
5008- 10.1 x 6.8 x 4.2
5208- same
5212- 13 x 9.5 x 4.7
The outside measurements on the c80 in place is 11 1/4 x 8 1/2. The 5212 looks to be an awfully tight fit width wise.
The 5008 and 5208 are about an inch smaller in both length and width.
Any thoughts on whether any of the three units will fit before I buy something and find out it's not going to work?
Thanks for any help.
5008- 10.1 x 6.8 x 4.2
5208- same
5212- 13 x 9.5 x 4.7
The outside measurements on the c80 in place is 11 1/4 x 8 1/2. The 5212 looks to be an awfully tight fit width wise.
The 5008 and 5208 are about an inch smaller in both length and width.
Any thoughts on whether any of the three units will fit before I buy something and find out it's not going to work?
Thanks for any help.