Harmon
Member
- Jun 28, 2011
- 363
- Boat Info
- Current: 2006 320DA as of 6/7/19
Previous 1997 Sundancer 250
1989 Basstracker 40HP
- Engines
- Twin 350 Horizon with Vdrives
Single 7.4 Ltr carbed
Bravo 3 outdrive
mine are done, Im putting some aftermarket LEDs under there.
Question is with wiring of course.
Should I A: remove old wire and try to run new wire through the existing grommet and caulk or B: cut the old wire under platform and splice with some water proof butt connectors and then a long length of some shrink tubing and sealant?.
Something tells me not to mess with the old through hull situation
Question is with wiring of course.
Should I A: remove old wire and try to run new wire through the existing grommet and caulk or B: cut the old wire under platform and splice with some water proof butt connectors and then a long length of some shrink tubing and sealant?.
Something tells me not to mess with the old through hull situation