markasaurus
New Member
- Jun 27, 2020
- 7
- Boat Info
- 2014 Sea Ray 310 Sundancer
- Engines
- Mercruiser 450 Bravo III
Hi, new to the forum and Sea Ray! We are in contract on a lightly used 2017 SD350 with twin 8.2 merc stern drives with 100 hours on each. She has been well cared for and looks pristine but we could use the wisdom of the Sea Ray Community here to make sure we are catching everything we can.
We have scheduled the haul out and survey for next week. Is there anything specific I should request from surveyor or be on the lookout for? I planned to have mech inspection remove the stern drives and check bellows, run through on the genny etc. but just don’t want to miss anything.
Any guidance is appreciated!
We have scheduled the haul out and survey for next week. Is there anything specific I should request from surveyor or be on the lookout for? I planned to have mech inspection remove the stern drives and check bellows, run through on the genny etc. but just don’t want to miss anything.
Any guidance is appreciated!