Sundacer cabinet door hinges?

[SCORPIO]

I noticed that the hinges on the mirrored hanging locker by the steps on my 89 300DA are broken. The metal around the top screw hole is broken off. I looked on Flounder Pounder and didn't see anything like them. Does anybody have a source for these hinges? Thanks in advance.

 

[mstang64bb]

I think you're talking about the face plates. These are what I have on my 268. I bought them a number of years ago through Amazon.
They are Blum 1 3/8" Plus Overlay Compact 33 Face Mount Mounting Plate

 

[SCORPIO]

Yes, that's it! Thanks for the info on them, I just ordered a 10 pack from Amazon, be here on Monday! I figured somebody knew who made these, glad I asked.

 

[Sundancer]

I just ordered some from this 5-year-old thread! Just a quick question, has anybody drilled a hole to KEEP the screw from moving on the face plate? I adjust three of my doors on every trip. I'm getting tired of it! The edges have broken off so the new plates will help. Just wondering if a pilot hole might help.

 

[SCORPIO]

I just ordered some from this 5-year-old thread! Just a quick question, has anybody drilled a hole to KEEP the screw from moving on the face plate? I adjust three of my doors on every trip. I'm getting tired of it! The edges have broken off so the new plates will help. Just wondering if a pilot hole might help.

Yes, I've thru bolted a couple, especially the one under the head vanity.
Also, Lowes has a very similar total hinge, just need to drill new screw holes.

 

[Sundancer]

Did you through bolt the adjustment screw to the face plate? That's the part I hate. That makes sense and would be a permanent and easy fix!

 

[SCORPIO]

Did you through bolt the adjustment screw to the face plate? That's the part I hate. That makes sense and would be a permanent and easy fix!

Yes, the base adj screw.

 

[zekester]

Mine don’t look like that…the blade from the other part of the hinge is wider, and has a slot. There’s a screw that goes through the slot, into the backing plate(the broken part)….I ordered what was mentioned above, but the blade is too wide to fit….

 

[SCORPIO]

Mine don’t look like that…the blade from the other part of the hinge is wider, and has a slot. There’s a screw that goes through the slot, into the backing plate(the broken part)….I ordered what was mentioned above, but the blade is too wide to fit….

Take an old one to Lowes, Home Depot etc and I think you'll find a very close match the only requires a couple new screw holes.