KHE
Member
- Feb 28, 2012
- 238
- Boat Info
- 1997 Sea Ray 240 Sundancer
- Engines
- Mercruiser 5.7L EFI alpha 1 Gen 2 drive
I noticed two connectors near the back of the box that houses the diagnostic connector and circuit breaker. One had blue wires that looked cut and the other had red wires that were just stubs - less than 1/16" long. They looked factory, not like someone butchered them with side cutters.
I unplugged the connector with the blue wires and there was a 15 amp fuse in there. The connector with the red wires had a 10 amp fuse in it. From what I can tell they don't connect to anything.
Any ideas what the purpose of those two connectors and fuses are?
I unplugged the connector with the blue wires and there was a 15 amp fuse in there. The connector with the red wires had a 10 amp fuse in it. From what I can tell they don't connect to anything.
Any ideas what the purpose of those two connectors and fuses are?