seacure
New Member
Need help finding part for lift mechanism in 1974 OMC Stringer outdrive. Gears stripped at connection between lift motor and lift gears. Any advice on a source for this part?
sterndrive lift part
- Thread starter seacure
- Start date
dicor
New Member
- Feb 19, 2011
- 835
- Boat Info
- 270 DA 1998
- Engines
- 7.4 Merc w/Bravo III Drive
You may want to give these folks a call, I have no info on them other than I found them on the internet. If they don't have what you are looking for maybe they can point you in the right direction.
http://www.topnotchmarine.com/custompage.asp?pg=johnsonevinrudeparts
http://www.topnotchmarine.com/custompage.asp?pg=johnsonevinrudeparts
wakeup 19
Member
- Nov 14, 2008
- 678
- Boat Info
- 1992 300 Sundancer, Quicksilver ding w/ 6hp merc 4 stroke, anchorlift windlass, extended swim platfo
- Engines
- t/ 350 merc's (carburated) alpha drives gen II
I use a place called aftermarket.com for all my parts. They are located on Louisiana and are very knowledgable. They may have it. web site is www.amarket.com gaskets, pumps, tuneup products are the cheapest I've seen. Good Luck Rob
p.s. Just checked the site and they have lots of Stringer gears hopefully the right one for you.
p.s. Just checked the site and they have lots of Stringer gears hopefully the right one for you.
Last edited:
SCORPIO
Well-Known Member
What part do you need? Is it the spur gear (the small one on the clutch assy. or the sector gear (the arc shaped big gear)?
I may have a spur gear somewhere if it would fit, my last boat had an '82 800 Stringer drive.
I may have a spur gear somewhere if it would fit, my last boat had an '82 800 Stringer drive.
blueciviccoupe
New Member
http://www.sterndrive.info/ this is a good place to find any of your omc parts for the older stringer drives they sell new and used parts i know its a little late to get this info but any and all resources help