Ka1oxd
New Member
- Nov 19, 2009
- 1,071
- Boat Info
- 1988 Sea Ray 340 Sundancer
- Engines
- 7.4l inboards
When I took my new boat out on the sea trial, after about a 1/3 turn to port, there was a pop. this could be repeated in the same spot over and over. Could this be the linkage in the rudder? I know the starboard rudder is sloppy, both side to side and up and down. This weekend is where I am getting into the mechanics since it is going to be 70 degrees here.