SPOKEN FOR ALREADY......Set of gauges.

[Bill Curtis]

Gauge set has been spoken for already

Have a set of gauges that were just removed from my 220. It's all 7 gauges. Tach / HM has 575 hrs on it.

Volt gauge was acting flakey in the boat, read 2 volts low and was getting stuck. Did new wire terminations when changed. New gauge reads right. Took the take out voltmeter to the bench cleaned up studs and now it's reading correctly and doesn't stick. I guess it's OK now.

Price is zip....... Nada.... Just pay the shipping....

 

[Bill Curtis]

Speedo and tach are same size. All the gauges are the standard size.

The brackets that hold them in are in the box, but not all the same depth. May have to use the ones on your gauges. Also, nuts and lock washers not there. Use the ones you have.

 

[Bill Curtis]

1. Is the RPM bigger than the MPH or it an optical illusion?
2. Are gauges a standard size or would I need to measure mine for fit?
I am very interested. But I am not a fabricator so I need a plug-n-play.
3. My hour meter is 557, so the HM would be close enuff.

Sent you a PM