SP 18 U-Line Icemaker repair

Trinity

Member
Sep 20, 2008
115
Kemah Texas
Boat Info
2006 58 Sedan Bridge
2007 11 ft. Boston Whaler Dingy
Engines
Man 900 HP
I need to take out my Uline Icemaker for repair - located on the cockpit of our 40 sedan bridge - has anyone completed this task
 
I need to take out my Uline Icemaker for repair - located on the cockpit of our 40 sedan bridge - has anyone completed this task

When I had to fix mine, I just sent them a line and they were so kind to send me back their service manual. It was then easy to find what was going wrong and to order the replacement part I needed :wink:
 
When I had to fix mine, I just sent them a line and they were so kind to send me back their service manual. It was then easy to find what was going wrong and to order the replacement part I needed :wink:

Sent it to whom? Uline? My ice maker and my full refrigerator aren't working. Any advice on what to do. Frig light is on but not cooling. Ice maker still not sure what is wrong with it.
Thanks,
 
Sent it to whom? Uline? My ice maker and my full refrigerator aren't working. Any advice on what to do. Frig light is on but not cooling. Ice maker still not sure what is wrong with it.
Thanks,

Yes, to U-Line. Following the troubleshooting guide you should be able to understand what's going wrong in your ice-maker.
 
There is a lot of information about U-Line repairs on the Boater Ed board. There is a sticky all about it.
 
I pulled ours looking for a leak. Was a little bit of a bear but got it out. These things are pretty simple. Just a water line coming in and a compressor to freeze it. I changed the water valve on ours and reassembled everything.
NOTE TO EVERYONE! Replace the plastic supply line while your right there-Ask me how I know. Ours must have had a hairline crack causing the leak and found that out after everything was put back together. Yup the 2 dollar part causing the biggest headache again.
 
Not sure the moderators will allow but here goes...........********.com. Ok..........so they bleeped out ********. You will need to re-read your question and use your imagination.
 
Use a ZERO for the O of what you're trying to type and it should work. They do the same with B0ATF!X.COM
 

Forum statistics

Threads
113,217
Messages
1,428,779
Members
61,114
Latest member
Hercy911
Back
Top