Ezsteps
Well-Known Member
- Nov 14, 2015
- 1,342
- Boat Info
- 1999 400 Sundancer, YL310 Zodiac, MX 335 Novurania
- Engines
- 7.4 Mercuisers Horizons 380 hp ea., 9.9 hp Mercury, 30 Yamaha
Good luck Greg, can't wait to see the finished product this summer.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Stee6043, I love your comment. I know we have the same boat and if the same jackass who laid my carpet did yours every section your try will be glued solid. BUT, it will come up.
Chris-380, not sure how old you are, I'm almost 61 and in the best shape of my life. But it is very labor intensive and I could only do about an hour at a time of really scrapping away without worrying about my marina finding me dead of a heart attack. But to answer your question, for your 38, it could be done in 4 - 6 hours with just one person. I like the heat gun suggestion someone made, but that would most likely take 2 people? I did find power at a close well and was able to use my oscillating tool which worked fairly well. I had all the carpet up, but used this to remove some of the heavy glue that remained on the floor. I will take video of this tomorrow.
Dock O Rock, I'm glad someone asked this as I'd like input. My leading candidate is the Cherry and Black Joint Nautik. It's sold by several names (i.e. Nautik, PlasTEAK). It will be about a grand for my 40 cabin floor, including aft cabin and 3 steps. I plan on screwing down plywood and this will glue done to it. BTW, I am told it would cost about 10 grand to pay a flooring company to rip out the old carpet, sand the floor smooth and install a marine floor for a 40DA.
View attachment 97085
I also found this flooring from HD that the Cherry matches fairly well with the SR cabinets, but the Cherry is only about 1/3 of the floor and the rest is the darker color, so I' afraid that may not look right? Being it's "regular flooring", not marine, it's way cheaper. It's glue down and fairly thin, so I can cut it with a razor knife.
View attachment 97086
I have some other samples of regular, thin glue down flooring that I am trying to match with our Cherry cabinets so I may use them. But the Nautik is in the lead. I also am considering a light color similar to the color of the original carpet. The forties are dark inside as we don't have the windows the other boats do so a light color laminate flooring may look good? Most are Oak and can you mix Oak with Cherry?
As I say in my video, with this COVID crap, I have all the time in the world, so I will spend the next 2 months getting the floor prepped for what every I decide. Stay tuned and let me know your thoughts on the flooring I have here.
Stee6043, I love your comment. I know we have the same boat and if the same jackass who laid my carpet did yours every section your try will be glued solid. BUT, it will come up.
Chris-380, not sure how old you are, I'm almost 61 and in the best shape of my life. But it is very labor intensive and I could only do about an hour at a time of really scrapping away without worrying about my marina finding me dead of a heart attack. But to answer your question, for your 38, it could be done in 4 - 6 hours with just one person. I like the heat gun suggestion someone made, but that would most likely take 2 people? I did find power at a close well and was able to use my oscillating tool which worked fairly well. I had all the carpet up, but used this to remove some of the heavy glue that remained on the floor. I will take video of this tomorrow.
Dock O Rock, I'm glad someone asked this as I'd like input. My leading candidate is the Cherry and Black Joint Nautik. It's sold by several names (i.e. Nautik, PlasTEAK). It will be about a grand for my 40 cabin floor, including aft cabin and 3 steps. I plan on screwing down plywood and this will glue done to it. BTW, I am told it would cost about 10 grand to pay a flooring company to rip out the old carpet, sand the floor smooth and install a marine floor for a 40DA.
View attachment 97085
I also found this flooring from HD that the Cherry matches fairly well with the SR cabinets, but the Cherry is only about 1/3 of the floor and the rest is the darker color, so I' afraid that may not look right? Being it's "regular flooring", not marine, it's way cheaper. It's glue down and fairly thin, so I can cut it with a razor knife.
View attachment 97086
I have some other samples of regular, thin glue down flooring that I am trying to match with our Cherry cabinets so I may use them. But the Nautik is in the lead. I also am considering a light color similar to the color of the original carpet. The forties are dark inside as we don't have the windows the other boats do so a light color laminate flooring may look good? Most are Oak and can you mix Oak with Cherry?
As I say in my video, with this COVID crap, I have all the time in the world, so I will spend the next 2 months getting the floor prepped for what every I decide. Stay tuned and let me know your thoughts on the flooring I have here.
I just peeled mine up a few weeks ago. It was easy. We used a scraper attachment on an oscillating tool. One guy peeled back the carpet while the other slid the tool back and forth. The key was to let the tool do the work. The entire carpet was up in a couple hours. New flooring is almost done.