Barry Baadte
New Member
- Nov 16, 2021
- 12
- Boat Info
- 2006, Sea Ray 320 Sundancer
- Engines
- 350 MAG MPI 5.7Lt V-Drive inboard
Hello All,
I have an 06' Sundancer 320DA and have three smartcraft gauges, one Tach for each engine and one Speedometer in the middle. The system is set for boat speed to come from the paddlewheel and all three gauges read boat speed but here is the catch, after running for a few seconds at speeds above say 8 0r 10 MPH, I get a "Check Paddle" alarm only on my port tach lcd. Stbd tach and MPH gauge have no alarms and read fine. Port gauge reads fine but shows that alarm. Anyone see this?
I have an 06' Sundancer 320DA and have three smartcraft gauges, one Tach for each engine and one Speedometer in the middle. The system is set for boat speed to come from the paddlewheel and all three gauges read boat speed but here is the catch, after running for a few seconds at speeds above say 8 0r 10 MPH, I get a "Check Paddle" alarm only on my port tach lcd. Stbd tach and MPH gauge have no alarms and read fine. Port gauge reads fine but shows that alarm. Anyone see this?