smart craft/ vessel view

Oliver Brickell

Oliver Brickell

New Member
PLATINUM Sponsor
Aug 26, 2020
23
Brickell Miami Florida
Boat Info
2010 Sea Ray Sundancer 500 Zeus Pod Drives Raymarine ES seriaes GPS
Engines
QSC Cummins 550 hp
Good evening everyone ,Please let me know if you have this experience ,All gauges and vessel view won't open to show engine base function ... any one know the reason ,engine start normally and run good ,but when i open the ignition key the gauges won't work at all.
Sea Ray 2010 500 sundancer engine Cummins QSC- 550 H.P. with Zeus pod drive me cruiser...

Best regards.
Humberto j. Oliver
 
This is a SHAPS question he has the same boat and pods. Send him a PM
 
First and easiest step is to check all connectors. Start with the connector(s) at the back of the Vessel View. There should be a harness leading from the Vessel View to a junction box and off the harness leads to your gauges. Try checking all those for snug fit and/or corrosion.
 
Thank you Alnav definitely will follow your advaice , I did check all the fuse ,connectors to the engine ,your advaice will be my next step tomorrow morning will let you know what happen you make very good sense to follow. Here are two pictures..
Thanks you.
 

Attachments

  • 20210204_160924.jpg
    20210204_160924.jpg
    76.7 KB · Views: 109
  • 20210204_160916.jpg
    20210204_160916.jpg
    95 KB · Views: 106
Good morning @Oliver Brickell
@alnav gave you great advice. Please check and report back
Under the dash is a bus that powers the helm. Perhaps make sure that has power as well. We will help get you going.

Great boat !!!:)
 
Thank shaps by the way if you ever have a problem with your Zeus i have the two units that came with the boat in storage ,when i purchase the boat last august , simple removed the transmission and lower unit and install two new ones upper and lower unit with the 1.95 ratio to have more fuel efficient crossing, this unit that i remover port and stard has 1.79 ratio. i can always sale parts to helps other ..
 
Oliver Brickell said:
Thank shaps by the way if you ever have a problem with your Zeus i have the two units that came with the boat in storage ,when i purchase the boat last august , simple removed the transmission and lower unit and install two new ones upper and lower unit with the 1.95 ratio to have more fuel efficient crossing, this unit that i remover port and stard has 1.79 ratio. i can always sale parts to helps other ..
Click to expand...
Thanks Oliver. Appreciate that.
Let's get you going! At the boat yet? Hehe
 
shaps, Done deal all when fine as you say ,next week will get a product to spray for seal connection
plugs and wire ......
Best regards.
Oliver
 
alnav said:
First and easiest step is to check all connectors. Start with the connector(s) at the back of the Vessel View. There should be a harness leading from the Vessel View to a junction box and off the harness leads to your gauges. Try checking all those for snug fit and/or corrosion.
Click to expand...
It when exactly as you recommend .....Thank all for the advice.
 
Did you fix it?
 
Nice Oliver!! What’s your boats name? Hope to see you on the water sometime either in Miami, the keys or the Bahamas.
 
Mileydis will see,sometimes on North Bimini,every weekend on Boca chita, on the Marine stadium , university, not name harbor and eliot key.
20210128_120019.jpg
20210127_163329.jpg
20210123_083551.jpg
 
You must log in or register to reply here.

Forum statistics

Threads
113,247
Messages
1,429,248
Members
61,127
Latest member
Ants84245srv
Back
Top